Buy Aluminum Oxide Blast Media —
All Grit Sizes In Stock

Brown fused and white fused aluminum oxide abrasive, F12 through F1200, available for immediate export worldwide. ISO 9001:2015 certified manufacturer with full Certificate of Analysis on every shipment.

ISO 9001:2015 Certified Lot-Specific CoA Standard FEPA F-Grits Certified Global Export — 40+ Countries 7–21 Day Production Lead Time

By Jiangsu Henglihong Technology Co., Ltd. March 2026 Jiangsu Province, China

Table of Contents

Products: Brown Fused & White Fused Aluminum Oxide
Complete Grit Size Stock List
Quick Application Picker: Which Grit Do I Need?
Why Buy from Jiangsu Henglihong Technology
How to Order: Step-by-Step Process
Packaging & Shipping
Quality Assurance & Documentation
Questions fréquemment posées

1. Products: Brown Fused & White Fused Aluminum Oxide

Jiangsu Henglihong Technology manufactures and exports two grades of fused aluminum oxide abrasive — the two most widely used grades in industrial surface preparation, abrasive blasting, glass processing, and anti-slip floor coating applications globally. Both are produced at our Jiangsu Province manufacturing facility, graded to FEPA F-grits tolerances, and backed by full lot-specific quality documentation.

2. Complete Grit Size Stock List

All grit sizes below are available for standard export orders. High-volume grits (F24, F36, F46, F60, F120) are maintained as continuous production stock and typically ship within 7–10 business days of order confirmation. Less common grits (F12, F14, F220 and finer) may require 14–21 business days production lead time. Contact us to confirm current stock status for your specific grit and grade requirement.

FEPA Grit	ANSI Mesh	D50 Particle (µm)	Grade Available	Typical Application	Stock Status
F12	#12	~2,000 µm	Marron	Heavy mill scale, large structural steel, civil infrastructure	On order — 14–21 days
F14	#14	~1,700 µm	Marron	Heavy scale, bridge girders, ship hull pre-treatment	On order — 14–21 days
F16	#16	~1,400 µm	Marron	Ship hulls, offshore platforms, heavy rust removal, SP 5	In stock — 7–10 days
F20	#20	~1,000 µm	Marron	Heavy fabrication, structural steel SP 5 coating prep	In stock — 7–10 days
F24	#24	~850 µm	Brown + White	General steel fabrication, pipe coating, tank linings, SP 10	In stock — 7–10 days
F30	#30	~710 µm	Brown + White	Steel prep for high-build coatings, industrial machinery	In stock — 7–10 days
F36	#36	~600 µm	Brown + White	Near-white blast, moderate-build coatings — best-selling grit	In stock — 7–10 days
F46	#46	~425 µm	Brown + White	Powder coating prep, automotive, anti-slip floor aggregates	In stock — 7–10 days
F54 / F60	#54 / #60	300–355 µm	Brown + White	Light steel prep, stainless surface conditioning, anti-slip R11	In stock — 7–10 days
F70 / F80	#70 / #80	212–250 µm	Brown + White	Stainless steel, precision components, glass frosting start	In stock — 7–10 days
F100 / F120	#100 / #120	125–150 µm	Brown + White	Architectural glass frosting, dental bonding prep, medical implants	In stock — 7–10 days
F150 / F180	#150 / #180	80–100 µm	Blanc	Fine glass work, orthopedic implant surface prep, dental ceramics	In stock — 7–10 days
F220	#220	~68 µm	Brown + White	Optical glass, electronics substrate, micro-blasting	In stock — 7–10 days
F240–F400	—	22–58 µm	Blanc	Precision lapping, optical components, LED diffuser glass	On order — 14–21 days
F500–F1200	—	8–20 µm	Blanc	Ultra-fine polishing, scientific glass, semiconductor substrates	On order — 14–21 days

Custom grit blends available: Mixed-grit blends — for example a 60/40 F24/F46 combination to target a specific anchor profile distribution — are available on request with a minimum 10 MT per blend and 3–4 weeks production lead time. Contact our application engineering team to discuss blend specifications for your process requirements.

3. Quick Application Picker: Which Grit Do I Need?

Not sure which grit size to order? Use this reference table to find the recommended grit and grade for the most common blasting applications. For a full engineering-level selection guide with anchor profile data and substrate-specific parameters, see our dedicated resource: Aluminum Oxide Grit Size Chart & Selection Guide.

Structural carbon steel — SSPC-SP 10 / ISO Sa 2½ (near-white blast)

F24–F36 Marron

Carbon steel — SSPC-SP 5 / ISO Sa 3 (white metal blast, immersion service)

F16–F24 Marron

Pipeline coating — FBE, 3LPE, liquid epoxy internal lining

F24–F36 Marron

Storage tank lining — immersion, chemical, or water service

F16–F24 Marron

Powder coating prep — mild steel sheet and fabricated components

F46–F60 Marron

Stainless steel — general industrial, food & beverage equipment

F46–F80 Blanc

Stainless steel — pharmaceutical, duplex, super-duplex

F60–F80 Blanc

Aluminum alloy — aerospace airframe and MRO paint stripping

F80–F120 Blanc

Titanium — aerospace components, thermal spray bond coat prep

F80–F150 Blanc

Medical implant — titanium or cobalt-chromium osseointegration surface

F120–F220 Blanc

Architectural glass frosting — office partitions, shower screens

F100–F120 Blanc

Artistic glass etching with resist stencil

F120–F220 Blanc

Dental ceramic bonding surface preparation

F100–F180 Blanc

Anti-slip epoxy floor coating — industrial / food processing

F46–F60 Both

Anti-slip floor coating — commercial / light-colored coating

F60–F80 Blanc

Cast iron — pump housings, valve bodies, machine components

F24–F46 Marron

Found your grit? Get a price now.

Tell us your grade, grit, quantity, and destination — we respond with a full quotation within one business day.

Obtenir un devis

4. Why Buy from Jiangsu Henglihong Technology

Hundreds of manufacturers supply aluminum oxide abrasive. The difference between a reliable long-term supply partner and a commodity vendor who ships inconsistent quality becomes clear the first time a CoA discrepancy, out-of-spec particle size, or documentation gap causes a production stoppage or a failed coating inspection. Here is what sets HLH apart in a competitive market.

QMS

ISO 9001:2015 Certified

Third-party audited quality management system covering all production processes, in-process testing, and outgoing inspection. Certificate available on request.

CoA

Lot CoA on Every Shipment

Every shipment includes a lot-specific Certificate of Analysis reporting Al₂O₃, Fe₂O₃, SiO₂, moisture, bulk density, and full FEPA sieve analysis — tied to your production lot number, not a generic template.

XRF

In-House Laboratory

XRF analyzers, laser particle size instrumentation, and automated sieve stations are integrated into every production line — chemistry and particle size are verified on every batch, not extrapolated from raw material certificates.

AMS

Aerospace & Medical Compliance

Conformance statements to AMS 2431/9 and EN ISO 11126-7 available on request. Third-party inspection by SGS, Bureau Veritas, or Intertek supported. Traceability documentation for NADCAP-audited supply chains.

PKG

Export-Ready Packaging

25 kg PP woven bags with PE moisture barrier, 1,000–1,200 kg FIBC bulk bags, ISPM-15 heat-treated pallets as standard. OEM / private-label packaging available for distributor accounts from 10 MT per SKU.

SHP

Global Export Capability

Regular shipments to North America, Europe, Middle East, Southeast Asia, Australasia, and South America. FOB Shanghai, CIF, DAP, and DDP Incoterms available. Full export documentation including Certificate of Origin.

What customers consistently report: lot-to-lot particle size consistency that keeps blast cabinet profiles stable across months of production, documentation packages that pass first-time at NADCAP and ISO 13485 supplier audits, and responsive technical support when application questions arise — not just a shipping confirmation email.

5. How to Order: Step-by-Step Process

From first enquiry to container delivery, here is exactly what to expect when ordering from Jiangsu Henglihong Technology for the first time.

1

Submit your enquiry or RFQ

Use our contact form at hlh-js.com/contact or email our export team directly. Include: product grade (brown or white), FEPA grit size(s), quantity in MT, preferred packaging (25 kg bags or FIBC), preferred Incoterms, and destination port. The more detail you provide, the faster and more accurate our response will be.

Same day or next business day

2

Receive formal quotation

Our export team prepares a formal proforma invoice or commercial quotation specifying: unit price, total price, packaging format, Incoterms, production lead time, and estimated vessel departure date. For new customers, we include a sample CoA and our ISO 9001:2015 certificate with the quotation for your supplier qualification review.

Within 1 business day

3

Place order and confirm payment terms

Issue your Purchase Order referencing the proforma invoice number. Payment terms are typically 30% T/T deposit on order confirmation, 70% T/T balance before shipment for new customers — or Letter of Credit (L/C) at sight for large orders. Established customers may negotiate open-account or extended payment terms after the first successful order cycle.

1–2 business days

4

Production and quality control

Your order is scheduled into production. Each production lot undergoes: XRF chemical analysis, FEPA sieve stack analysis (D10/D50/D90), moisture measurement, and bulk density verification. Results are compiled into your lot-specific Certificate of Analysis. For orders requiring third-party inspection, the inspector is invited to attend during production or pre-shipment at your choice.

7–21 business days depending on grit

5

Pre-shipment documentation and container loading

Container is loaded and stuffed under supervision. Full export documentation is prepared: commercial invoice, packing list, bill of lading, Certificate of Analysis, Certificate of Origin, and SDS. All documents are sent to you digitally before vessel departure. Hard copies are included in the container (typically in a document sleeve on the inside of the container door).

2–3 business days

6

Ocean freight transit

Container departs from Shanghai port. Typical ocean transit times: Asia to Europe (25–32 days), Asia to USA East Coast (28–35 days), Asia to USA West Coast (18–24 days), Asia to Middle East (12–18 days), Asia to Australasia (14–20 days). You receive the Bill of Lading and tracking information immediately after vessel departure.

14–35 days depending on destination

7

Arrival, customs clearance, and delivery

For FOB/CFR/CIF orders, you arrange import customs clearance and inland delivery at the destination port. For DAP or DDP orders, HLH arranges delivery to your named location. On receipt, verify container seal number against the Bill of Lading, inspect packaging for moisture damage or physical damage before signing the delivery receipt. Report any discrepancies within 48 hours of container opening.

1–5 days at destination port

6. Packaging & Shipping

Standard Packaging Options

Option A

25 kg Bag

PP woven outer bag + PE moisture barrier inner liner. Heat-sealed. 40–50 bags per pallet. Standard for most buyers. Lot number printed on each bag.

Option B

1,000 kg FIBC

Bulk bag (super sack) with PE inner liner, top fill spout, bottom discharge. Four-loop lifting, 1,500 kg SWL. 20–22 bags per 20′ FCL. Forklift required.

Option C

1,200 kg FIBC

Higher-capacity bulk bag for dense fine-grit grades. Same construction as 1,000 kg. Preferred by high-volume blast cabinet operators processing large shifts.

Option D

OEM / Custom

Private-label 25 kg bags with your brand and logo. Min. 10 MT per SKU. First order lead time +3–4 weeks for printing setup. Available to distributor accounts.

Incoterms & Shipping Options

HLH quotes FOB Shanghai as the default pricing basis. We also offer CFR, CIF, DAP, and DDP to qualifying markets. For buyers without experience importing from China, we recommend CIF — HLH arranges ocean freight and marine insurance, leaving only import customs clearance and inland delivery to your logistics provider at the destination. For bulk buyers with established freight forwarder relationships, FOB typically delivers the lowest landed cost when combined with your negotiated freight rates.

Urgent requirement? If your project requires media before an ocean freight container can arrive, we can ship trial or partial quantities by air freight. Air freight is significantly more expensive per kilogram than ocean, but for urgent production requirements or first-article qualification samples, it eliminates the 5–7 week ocean transit. Request air freight pricing in your enquiry and we will quote both options so you can make an informed decision.

7. Quality Assurance & Documentation

Every HLH export shipment includes the following quality documentation as standard — no additional charge, no request needed:

Lot-specific Certificate of Analysis (CoA) — Al₂O₃ purity, Fe₂O₃, SiO₂, TiO₂ (brown), Na₂O, moisture content, bulk density, and full FEPA sieve analysis (D10/D50/D90 and sieve stack retained percentages). Tied to your production lot number.
FEPA Particle Size Distribution Certificate — confirms compliance with FEPA 42-2 F-grits tolerance for the specified grit designation.
Safety Data Sheet (SDS) — REACH-compliant, available in English and other languages on request.
Packing List — itemizes each pallet, lot number, net and gross weights for customs clearance.
Commercial Invoice and Bill of Lading — with HS code 2818.10, country of origin, and agreed Incoterms.

Available on request (at no additional cost unless third-party testing is required):

AMS 2431/9 conformance statement (aerospace procurement)
EN ISO 11126-7 conformance statement (European industrial specifications)
Certificate of Origin — Form E (ASEAN-China FTA) or standard CO
Third-party pre-shipment inspection by SGS, Bureau Veritas, or Intertek (at buyer’s cost)
REACH compliance declaration and RoHS declaration

For detailed information on bulk ordering, volume pricing tiers, and RFQ submission, see our dedicated purchasing guide: Bulk Aluminum Oxide Blast Media – Wholesale Pricing & RFQ.

8. Frequently Asked Questions

The standard minimum order quantity for export is one full container load (1 FCL) — typically 20–25 metric tonnes depending on grit size and packaging format. For first-time buyers conducting qualification testing, trial orders from 25 kg are available, shipped by LCL ocean freight or air freight. Standard FCL orders on stocked grits (F16–F220) typically leave our facility within 7–10 business days of order confirmation. Total lead time to your port, including ocean transit, is typically 5–7 weeks to Europe and 4–6 weeks to the USA. For urgent requirements, air freight cuts total lead time to 2–3 weeks at a significantly higher per-kilogram freight cost.

The decision rule is straightforward: use brown fused aluminum oxide for carbon steel, cast iron, concrete, and any ferrous substrate where iron contamination from the abrasive is inconsequential. Use white fused aluminum oxide for stainless steel, duplex alloys, aluminum, titanium, glass, ceramics, medical implants, and any application where the substrate or service environment cannot tolerate iron contamination. If you are unsure, white fused is the safer choice — it performs equivalently to brown on all substrates where brown is appropriate, at a 30–60% unit price premium. For a full decision guide covering 12 real-world application scenarios, see: Brown vs White Aluminum Oxide: Which Should You Use?

Yes. We provide free physical samples (typically 1–2 kg per grit/grade) by international courier for qualified industrial buyers who are evaluating our product for a specific application. Larger trial quantities (25 kg–500 kg) can be arranged as paid sample orders, shipped by LCL ocean freight or air freight depending on your timeline. Sample orders include a full CoA for the specific production lot from which the sample was drawn — so your incoming test results are directly comparable to the data we provide, not taken from a separate “clean” lot. To request a sample, contact us with your company name, application description, and grit specification.

Yes. Mixed-grit and mixed-grade container loads are standard for distributor customers. Each grit and grade combination is packed on a separate, clearly labeled pallet lot with its own lot number and CoA. The packing list itemizes each lot separately for customs declaration and quality record purposes. The only practical constraint is the container’s net payload limit — typically 21–23 MT for a 20-foot dry container depending on the container’s tare weight. Our logistics team will calculate the optimal pallet mix to maximize container utilization and provide a full packing plan before loading.

Our white fused aluminum oxide meets the material composition requirements of AMS 2431/9 (≥ 99.5% Al₂O₃, < 0.1% Fe₂O₃, FEPA particle size distribution), and we provide written conformance statements to AMS 2431/9 and EN ISO 11126-7 on request. We support third-party laboratory verification for aerospace supplier qualification processes and have supplied to NADCAP-audited blast shops in North America and Europe. For medical device applications requiring ISO 13485 supply chain documentation, we provide full lot-specific CoA, traceability records, and can support the documentation requirements of FDA 21 CFR Part 820 and EU MDR 2017/745 regulated manufacturing processes. For the full aerospace and medical application guide, see: Aluminum Oxide Blast Media for Aerospace & Medical.

For first-time customers, our standard payment terms are 30% T/T (telegraphic transfer) deposit on order confirmation and 70% T/T balance payment against the copy of the Bill of Lading before original documents are released. Letter of Credit (L/C) at sight is accepted for orders above approximately $30,000 USD on request. For established customers with a track record of on-time payment, we can discuss open-account (net 30 or net 45) terms or reduced deposit percentages after the first successful order cycle. We do not accept PayPal or credit card payments for commercial export orders. All invoices are in USD as standard; EUR invoicing is available for European buyers on request.

Ready to Place Your Order?

Contact our export team with your grade, grit size, quantity, and destination — and receive a formal quotation with full documentation details within one business day.

Get a Price Quote View Products Bulk Pricing Guide