{"id":13848,"date":"2026-07-30T06:48:18","date_gmt":"2026-07-30T06:48:18","guid":{"rendered":"https:\/\/hlh-js.com\/?p=13848"},"modified":"2026-07-30T06:48:18","modified_gmt":"2026-07-30T06:48:18","slug":"ceramic-bead-blasting-tpu-flexible-sls-parts-gentle-depowdering-without-deformation","status":"publish","type":"post","link":"https:\/\/hlh-js.com\/ja\/resource\/blog\/ceramic-bead-blasting-tpu-flexible-sls-parts-gentle-depowdering-without-deformation\/","title":{"rendered":"Ceramic Bead Blasting TPU Flexible SLS Parts: Gentle Depowdering Without Deformation"},"content":{"rendered":"<script type=\"application\/ld+json\">{\n    \"@context\": \"https:\\\/\\\/schema.org\",\n    \"@graph\": [\n        {\n            \"@type\": \"Article\",\n            \"headline\": \"Ceramic Bead Blasting TPU Flexible SLS Parts: Gentle Depowdering Without Deformation\",\n            \"description\": \"A complete low-pressure ceramic bead depowdering protocol for TPU and flexible SLS parts \\u2014 covering material response to blast impact, bead grade and size selection, multi-cycle inspection approach, and surface finish expectations for Shore A 75\\u201395 elastomeric SLS materials.\",\n            \"datePublished\": \"2026-07-27\",\n            \"dateModified\": \"2026-07-27\",\n            \"author\": {\n                \"@type\": \"Organization\",\n                \"name\": \"Jiangsu Henglihong Technology Co., Ltd.\",\n                \"url\": \"https:\\\/\\\/hlh-js.com\"\n            },\n            \"publisher\": {\n                \"@type\": \"Organization\",\n                \"name\": \"Jiangsu Henglihong Technology Co., Ltd.\",\n                \"url\": \"https:\\\/\\\/hlh-js.com\"\n            },\n            \"mainEntityOfPage\": {\n                \"@type\": \"WebPage\",\n                \"@id\": \"https:\\\/\\\/hlh-js.com\\\/resource\\\/blog\\\/ceramic-bead-blasting-tpu-flexible-sls-parts-gentle-depowdering-without-deformation\\\/\"\n            }\n        },\n        {\n            \"@type\": \"FAQPage\",\n            \"mainEntity\": [\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"What blast pressure is safe for Shore A 85\\u201395 TPU SLS parts?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"For Shore A 85\\u201395 TPU SLS parts with wall thicknesses above 2 mm, a blast pressure of 35\\u201345 PSI in a suction-feed cabinet is the recommended starting range. Run in cycles of 2\\u20134 minutes and inspect between each cycle for deformation of walls, collapse of lattice cells, or rounding of sharp features. If any deformation is observed, reduce pressure by 5 PSI and re-qualify. Parts with walls below 2 mm or open lattice struts below 1.5 mm should start at the lower end of this range (35\\u201338 PSI).\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Can I use the same blast cabinet for both rigid PA12 and flexible TPU SLS parts?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Yes \\u2014 the same blast cabinet handles both materials. No media change is needed if you are using ZS ceramic beads for both. The key change is reducing inlet pressure from the PA12 range (55\\u201375 PSI) to the TPU range (30\\u201345 PSI). For suction-feed cabinets, this is a simple pressure regulator adjustment. For pressure-feed systems, note that equivalent velocity reduction may require a larger reduction in inlet PSI than for suction-feed. After processing TPU, blow the cabinet clear of any remaining TPU powder before returning to PA12 production \\u2014 TPU powder residue is heavier and stickier than PA12 powder.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"How do I blast internal lattice structures in flexible SLS parts without deforming them?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Blast lattice structures at the lowest pressure in your safe range (30\\u201335 PSI for Shore A 85\\u201395), using fine beads (0.05\\u20130.10 mm) and very short cycles (1.5\\u20132.5 minutes). Rotate the part between cycles to distribute blast impact evenly across all lattice faces. Inspect under bright directional light after each cycle \\u2014 lattice cell shape under magnification is the best indicator of whether impact energy is within safe bounds. Incomplete powder removal from lattice interiors is preferable to deformation; if the lattice is too fine for ceramic bead access, compressed air blow-off after a gentle external blast is the practical alternative.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"What is the minimum wall thickness at which ceramic bead blasting is safe for TPU SLS?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"As a general guideline, ceramic bead blasting with ZS media at 30\\u201338 PSI is safe for TPU wall thicknesses of 1.2 mm and above on Shore A 85\\u201395 materials. For wall thicknesses of 0.8\\u20131.2 mm, reduce pressure to 28\\u201332 PSI and use the finest available bead size (0.05\\u20130.08 mm), running 1\\u20132 minute cycles only. For wall thicknesses below 0.8 mm on flexible TPU, consider manual compressed-air depowdering rather than media blasting \\u2014 the deformation risk outweighs the benefit of ceramic bead impact at any practical pressure.\"\n                    }\n                }\n            ]\n        }\n    ]\n}<\/script>\n\n<style>\n.hlh-sls-c03{font-family:'Segoe UI',Arial,sans-serif;color:#2c3e50;line-height:1.82;max-width:860px;margin:0 auto;font-size:16px}\n.hlh-sls-c03 h1{font-size:2rem;color:#1a3456;font-weight:700;line-height:1.28;margin:0 0 .5rem}\n.hlh-sls-c03 h2{font-size:1.46rem;color:#1a3456;font-weight:700;margin:2.5rem 0 .72rem;padding-bottom:.4rem;border-bottom:3px solid #d86e18}\n.hlh-sls-c03 h3{font-size:1.14rem;color:#1a3456;font-weight:700;margin:1.75rem 0 .5rem}\n.hlh-sls-c03 h4{font-size:1rem;color:#d86e18;font-weight:700;margin:1.2rem 0 .35rem}\n.hlh-sls-c03 p{margin:0 0 1rem}.hlh-sls-c03 ul,.hlh-sls-c03 ol{margin:0 0 1rem 1.5rem;padding:0}.hlh-sls-c03 li{margin-bottom:.38rem}\n.hlh-sls-c03 a{color:#d86e18;text-decoration:none;border-bottom:1px solid rgba(216,110,24,.35);transition:color .2s,border-color .2s}.hlh-sls-c03 a:hover{color:#b85a10;border-bottom-color:#b85a10}\n.hlh-sls-c03 .meta{font-size:.85rem;color:#6b7c93;margin:.3rem 0 1.5rem}\n.hlh-sls-c03 .lead{font-size:1.07rem;color:#334f6e;line-height:1.9;padding:1.1rem 1.4rem;border-left:5px solid #d86e18;background:#fff8f2;border-radius:0 6px 6px 0;margin-bottom:2rem}\n.hlh-sls-c03 .back{display:flex;align-items:center;gap:.75rem;background:#f0f4f8;border:1px solid #c9d8e8;border-left:4px solid #1a3456;border-radius:0 6px 6px 0;padding:.72rem 1.2rem;margin-bottom:2rem;font-size:.9rem;color:#334f6e}\n.hlh-sls-c03 .back a{font-weight:600;color:#1a3456}.hlh-sls-c03 .back a:hover{color:#d86e18}\n.hlh-sls-c03 .stats{display:flex;flex-wrap:wrap;gap:.85rem;margin:1.8rem 0 2.2rem}\n.hlh-sls-c03 .stat{flex:1 1 145px;background:#1a3456;color:#fff;border-radius:8px;padding:1.1rem .9rem .9rem;text-align:center}\n.hlh-sls-c03 .stat-n{display:block;font-size:1.55rem;font-weight:700;color:#d86e18;line-height:1.1}\n.hlh-sls-c03 .stat-l{display:block;font-size:.78rem;margin-top:.3rem;opacity:.85;line-height:1.35}\n.hlh-sls-c03 .toc{background:#f0f4f8;border:1px solid #c9d8e8;border-left:5px solid #1a3456;border-radius:0 6px 6px 0;padding:1.2rem 1.5rem;margin:0 0 2.4rem}\n.hlh-sls-c03 .toc-h{font-size:.87rem;font-weight:700;color:#1a3456;text-transform:uppercase;letter-spacing:.07em;margin:0 0 .7rem}\n.hlh-sls-c03 .toc ol{margin:0;padding-left:1.2rem}.hlh-sls-c03 .toc li{font-size:.91rem;margin-bottom:.26rem}\n.hlh-sls-c03 .toc a{color:#1a3456;border-bottom:none;text-decoration:underline;text-decoration-color:rgba(26,52,86,.3)}.hlh-sls-c03 .toc a:hover{color:#d86e18}\n.hlh-sls-c03 .box{background:#f0f4f8;border:1px solid #c9d8e8;border-left:5px solid #1a3456;border-radius:0 6px 6px 0;padding:1.1rem 1.4rem;margin:1.4rem 0}\n.hlh-sls-c03 .box-a{background:#fff8f2;border-left-color:#d86e18}\n.hlh-sls-c03 .box h4{margin-top:0;color:#1a3456;font-size:.96rem}.hlh-sls-c03 .box p:last-child,.hlh-sls-c03 .box ul:last-child{margin-bottom:0}\n.hlh-sls-c03 .tw{overflow-x:auto;margin:1.4rem 0;border-radius:6px;border:1px solid #c9d8e8}\n.hlh-sls-c03 table{width:100%;border-collapse:collapse;font-size:.9rem;min-width:520px}\n.hlh-sls-c03 thead tr{background:#1a3456}.hlh-sls-c03 th{color:#fff;padding:.65rem .9rem;text-align:left;font-weight:600;font-size:.85rem;white-space:nowrap}\n.hlh-sls-c03 td{padding:.6rem .9rem;border-bottom:1px solid #e2eaf2;vertical-align:top}.hlh-sls-c03 tr:last-child td{border-bottom:none}.hlh-sls-c03 tbody tr:nth-child(even){background:#f7f9fb}.hlh-sls-c03 td strong{color:#1a3456}\n.hlh-sls-c03 .dive{display:flex;align-items:flex-start;gap:1rem;background:#f0f4f8;border:1px solid #c9d8e8;border-top:3px solid #d86e18;border-radius:6px;padding:.95rem 1.25rem;margin:1.5rem 0 2rem}\n.hlh-sls-c03 .dive-i{font-size:1.4rem;flex-shrink:0;margin-top:2px}\n.hlh-sls-c03 .dive-l{display:block;font-size:.74rem;font-weight:700;color:#d86e18;text-transform:uppercase;letter-spacing:.06em;margin-bottom:.18rem}\n.hlh-sls-c03 .dive a{font-size:.94rem;font-weight:600;color:#1a3456;border:none;display:block;margin-bottom:.18rem}.hlh-sls-c03 .dive a:hover{color:#d86e18}\n.hlh-sls-c03 .dive p{font-size:.85rem;color:#4a6278;margin:0;line-height:1.5}\n.hlh-sls-c03 .rel-g{display:grid;grid-template-columns:repeat(auto-fill,minmax(225px,1fr));gap:.8rem;margin:1.4rem 0 2rem}\n.hlh-sls-c03 .rel-c{background:#f7f9fb;border:1px solid #c9d8e8;border-top:3px solid #1a3456;border-radius:6px;padding:.9rem 1rem}\n.hlh-sls-c03 .rel-c a{display:block;font-weight:600;font-size:.9rem;color:#1a3456;border:none;margin-bottom:.22rem;line-height:1.4}.hlh-sls-c03 .rel-c a:hover{color:#d86e18}\n.hlh-sls-c03 .rel-c p{font-size:.81rem;color:#4a6278;margin:0;line-height:1.43}\n.hlh-sls-c03 .fi{border:1px solid #c9d8e8;border-radius:6px;margin-bottom:.52rem;overflow:hidden}\n.hlh-sls-c03 .fq{background:#f0f4f8;padding:.9rem 1.2rem;font-weight:600;font-size:.94rem;color:#1a3456;cursor:pointer;display:flex;justify-content:space-between;align-items:center;border:none;width:100%;text-align:left;transition:background .18s}.hlh-sls-c03 .fq:hover{background:#e4edf6}\n.hlh-sls-c03 .fi-icon{font-size:1.2rem;color:#d86e18;flex-shrink:0;margin-left:.9rem;transition:transform .22s;font-weight:400}.hlh-sls-c03 .fq.open .fi-icon{transform:rotate(45deg)}\n.hlh-sls-c03 .fa{display:none;padding:.88rem 1.2rem 1rem;font-size:.92rem;background:#fff;color:#2c3e50;line-height:1.78;border-top:1px solid #e2eaf2}.hlh-sls-c03 .fa.open{display:block}.hlh-sls-c03 .fa p:last-child{margin-bottom:0}\n.hlh-sls-c03 .cta{background:linear-gradient(135deg,#1a3456 0%,#24466e 100%);border-radius:10px;padding:2rem 2.3rem;margin:2.8rem 0 1rem;text-align:center}\n.hlh-sls-c03 .cta h3{color:#fff;font-size:1.28rem;margin:0 0 .6rem}.hlh-sls-c03 .cta p{color:rgba(255,255,255,.84);font-size:.94rem;margin-bottom:1.3rem}\n.hlh-sls-c03 .btn{display:inline-block;background:#d86e18;color:#fff!important;font-weight:700;font-size:1rem;padding:.73rem 2.1rem;border-radius:4px;text-decoration:none!important;border:none!important;transition:background .2s}.hlh-sls-c03 .btn:hover{background:#b85a10}\n@media(max-width:640px){.hlh-sls-c03 h1{font-size:1.5rem}.hlh-sls-c03 h2{font-size:1.2rem}.hlh-sls-c03 .cta{padding:1.5rem 1.2rem}.hlh-sls-c03 .dive{flex-direction:column;gap:.4rem}}\n<\/style>\n\n<article class=\"hlh-sls-c03\">\n<div class=\"back\">&#8592; Part of: <a href=\"https:\/\/hlh-js.com\/resource\/blog\/ceramic-beads-sls-powder-removal-complete-guide\/\" target=\"_blank\" rel=\"noopener noreferrer\">Ceramic Beads for SLS Powder Removal \u2014 Complete Guide<\/a><\/div>\n\n<h1>Ceramic Bead Blasting TPU Flexible SLS Parts: Gentle Depowdering Without Deformation<\/h1>\n<p class=\"meta\">By Jiangsu Henglihong Technology Co., Ltd. &nbsp;|&nbsp; Last updated: July 2026<\/p>\n\n<p class=\"lead\">Flexible SLS materials \u2014 TPU, elastomeric nylon, and similar Shore A 70\u201395 grades \u2014 are the most challenging category for ceramic bead depowdering. Unlike rigid PA12 or PA11, these materials compress and deform under bead impact rather than holding position. Getting them clean without deforming walls, collapsing lattice cells, or permanently rounding sharp features requires a completely different protocol: lower pressure, finer beads, shorter cycles, careful fixturing, and disciplined mid-cycle inspection.<\/p>\n\n<div class=\"stats\">\n  <div class=\"stat\"><span class=\"stat-n\">30\u201345 PSI<\/span><span class=\"stat-l\">Recommended blast pressure for Shore A 85\u201395 TPU<\/span><\/div>\n  <div class=\"stat\"><span class=\"stat-n\">0.05\u20130.15 mm<\/span><span class=\"stat-l\">Recommended ceramic bead size range for flexible SLS<\/span><\/div>\n  <div class=\"stat\"><span class=\"stat-n\">2\u20134 min<\/span><span class=\"stat-l\">Maximum single cycle before mid-cycle inspection<\/span><\/div>\n  <div class=\"stat\"><span class=\"stat-n\">200\u2013600%<\/span><span class=\"stat-l\">Typical TPU SLS elongation at break<\/span><\/div>\n<\/div>\n\n<nav class=\"toc\"><p class=\"toc-h\">Table of Contents<\/p>\n<ol>\n<li><a href=\"#c03-challenge\">The Depowdering Challenge for Flexible SLS Materials<\/a><\/li>\n<li><a href=\"#c03-response\">How TPU SLS Parts Respond to Bead Impact<\/a><\/li>\n<li><a href=\"#c03-grade\">Ceramic Bead Grade and Size Selection for Flexible SLS<\/a><\/li>\n<li><a href=\"#c03-proto-a\">Low-Pressure Protocol: Shore A 85\u201395 TPU<\/a><\/li>\n<li><a href=\"#c03-proto-b\">Very-Low-Pressure Protocol: Shore A 75\u201385 TPU<\/a><\/li>\n<li><a href=\"#c03-multicycle\">Multi-Cycle Approach and Mid-Cycle Inspection<\/a><\/li>\n<li><a href=\"#c03-fixture\">Fixture and Support Design for Flexible SLS Blasting<\/a><\/li>\n<li><a href=\"#c03-ra\">Surface Finish Outcomes on TPU SLS After Blasting<\/a><\/li>\n<li><a href=\"#c03-vs-plastic\">Ceramic Beads vs. Plastic Media for Flexible SLS<\/a><\/li>\n<li><a href=\"#c03-faq\">\u3088\u304f\u3042\u308b\u8cea\u554f<\/a><\/li>\n<\/ol><\/nav>\n\n<h2 id=\"c03-challenge\">1. The Depowdering Challenge for Flexible SLS Materials<\/h2>\n<p>Thermoplastic polyurethane (TPU) SLS parts bring capabilities that rigid nylon cannot match: vibration damping, compressible cushioning, integrated seals, flex-and-return joints, and impact absorption in a single printed body. The same elastomeric properties that make these parts commercially valuable also make them fundamentally more difficult to depowder than rigid SLS materials.<\/p>\n<p>After a TPU SLS build, the part surface carries the same three residue categories as PA12: loose powder in internal features, caked powder in compressed geometry, and a semi-sintered skin bonded to all external surfaces. But the strategy for removing this powder must account for a part that bends, compresses, and deforms under the forces applied during cleaning \u2014 forces that would be negligible on a rigid PA12 equivalent.<\/p>\n<p>The consequences of an incorrect TPU blast protocol are visible and irreversible: lattice cell walls that should be cylindrical become faceted or collapsed; sharp edges that should be crisp become permanently rounded; thin membranes that should flex freely become rippled or creased. Unlike PA12 where over-blasting primarily increases Ra and reduces dimensions slightly, over-blasting TPU produces geometric distortion that fails the part entirely.<\/p>\n\n<h2 id=\"c03-response\">2. How TPU SLS Parts Respond to Bead Impact<\/h2>\n<p>Understanding the physical mechanism of TPU deformation under blast impact is the prerequisite to designing a protocol that avoids it.<\/p>\n<p>When a ceramic bead strikes a rigid PA12 surface, the bead transfers its kinetic energy to the surface over a very short contact time and the surface deforms elastically by micrometres before springing back. The bead bounces; the surface is unaffected structurally. The energy transferred dislodges the adherent powder skin.<\/p>\n<p>When the same bead strikes a Shore A 85 TPU surface at the same velocity, the surface does not spring back immediately \u2014 it compresses visco-elastically under the bead, absorbing a much larger fraction of the kinetic energy into deformation rather than transmitting it to the powder skin. The impact zone sinks inward during contact; adjacent material is pulled laterally; the bead rebounds with less energy than it struck with; and the surface, while not permanently damaged by a single impact, has experienced a larger deformation than PA12 would.<\/p>\n<p>The cumulative effect of thousands of impacts at too-high energy is where permanent deformation occurs. Each high-energy impact incrementally cold-works the TPU surface, progressively rounding edges, flattening ribs, and collapsing fine features. The threshold at which cumulative deformation becomes irreversible depends on Shore hardness, wall thickness, and part geometry.<\/p>\n\n<h2 id=\"c03-grade\">3. Ceramic Bead Grade and Size Selection for Flexible SLS<\/h2>\n<p>Two variables drive the per-impact energy applied to TPU: bead density (a property of the ceramic grade) and bead velocity (controlled by blast pressure). The most effective approach for flexible SLS is to use the lowest practical bead density while maintaining adequate cleaning energy \u2014 which means selecting the ceramic grade that is just hard enough to dislodge the semi-sintered skin at reduced pressure.<\/p>\n<div class=\"tw\"><table><thead><tr><th>Bead Grade<\/th><th>\u5bc6\u5ea6 (g\/cm\u00b3)<\/th><th>Recommended TPU Application<\/th><th>Pressure Range<\/th><\/tr><\/thead>\n<tbody>\n<tr><td><strong>Zirconia-Silicate (ZS)<\/strong><\/td><td>3.8\u20134.0<\/td><td>Shore A 82\u201395 TPU, walls \u2265 1.5 mm<\/td><td>35\u201345 PSI<\/td><\/tr>\n<tr><td><strong>Alumina-Silicate<\/strong><\/td><td>2.4\u20132.7<\/td><td>Shore A 75\u201385 TPU, walls 1.0\u20132.0 mm<\/td><td>32\u201342 PSI<\/td><\/tr>\n<tr><td><strong>Pure ZrO\u2082<\/strong><\/td><td>5.4\u20135.6<\/td><td>Not recommended for flexible SLS<\/td><td>\u2014<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p><strong>Bead size: always use the fine end of the range for flexible SLS.<\/strong> Fine beads (0.05\u20130.15 mm) carry less kinetic energy per particle than coarser beads, which is the key lever for reducing deformation risk. The trade-off \u2014 longer cycle time \u2014 is acceptable for flexible SLS parts, which are typically higher-value items where the cost of deformation-caused rejection exceeds the cost of a longer blast cycle.<\/p>\n<p>The internal channel sizing rule (bead diameter \u2264 1\/4 of channel opening) applies to flexible SLS just as for rigid \u2014 with the additional note that channels in TPU parts may partially compress closed under blast pressure if walls are thin, so choose the smallest bead size that still exits the channel rather than the largest that can enter.<\/p>\n\n<h2 id=\"c03-proto-a\">4. Low-Pressure Protocol: Shore A 85\u201395 TPU<\/h2>\n<p>Shore A 85\u201395 represents the majority of TPU SLS production \u2014 materials that are noticeably flexible compared to nylon but that still maintain enough stiffness to hold their geometry under moderate external force. These parts can be blasted with ceramic beads at significantly reduced pressure with good results.<\/p>\n<div class=\"tw\"><table><thead><tr><th>Feature<\/th><th>Wall Thickness<\/th><th>Bead Grade \/ Size<\/th><th>Pressure<\/th><th>Cycle Duration<\/th><\/tr><\/thead>\n<tbody>\n<tr><td><strong>Standard body (Shore A 88\u201395)<\/strong><\/td><td>\u2265 2.5 mm<\/td><td>ZS 0.10\u20130.15 mm<\/td><td>38\u201345 PSI<\/td><td>3\u20135 min per cycle<\/td><\/tr>\n<tr><td><strong>Moderate body (Shore A 85\u201392)<\/strong><\/td><td>1.5\u20132.5 mm<\/td><td>ZS 0.08\u20130.12 mm<\/td><td>33\u201342 PSI<\/td><td>2\u20134 min per cycle<\/td><\/tr>\n<tr><td><strong>Fine lattice (Shore A 85\u201395)<\/strong><\/td><td>Strut \u2265 1.5 mm<\/td><td>ZS 0.05\u20130.10 mm<\/td><td>30\u201338 PSI<\/td><td>1.5\u20133 min per cycle<\/td><\/tr>\n<tr><td><strong>Channels &lt; 1 mm<\/strong><\/td><td>Body \u2265 2 mm<\/td><td>ZS 0.05\u20130.08 mm<\/td><td>30\u201336 PSI<\/td><td>2\u20134 min per cycle<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p><strong>Use a suction-feed cabinet<\/strong> for all TPU blasting. Suction-feed delivers lower blast velocity at equivalent inlet pressure than pressure-feed, providing a more forgiving process window. For Shore A 85\u201395 parts where the wall structure can tolerate somewhat more energy, pressure-feed can be used at 8\u201312 PSI lower than the suction-feed guideline values \u2014 but suction-feed is strongly preferred until the protocol is well-established.<\/p>\n\n<h2 id=\"c03-proto-b\">5. Very-Low-Pressure Protocol: Shore A 75\u201385 TPU<\/h2>\n<p>Very flexible TPU materials \u2014 Shore A 75 to 85 \u2014 require an even more conservative approach. At these hardnesses, the material compresses significantly under relatively modest blast impact, and the risk of permanent deformation is present even at the lower end of the standard flexible SLS pressure range.<\/p>\n<div class=\"box box-a\">\n<h4>Very-low-pressure ceramic bead protocol for Shore A 75\u201385 TPU<\/h4>\n<ul>\n<li><strong>Bead grade:<\/strong> Alumina-silicate (lowest density in the ceramic family, 2.4\u20132.7 g\/cm\u00b3) at 0.05\u20130.10 mm<\/li>\n<li><strong>Blast pressure:<\/strong> 28\u201336 PSI \u2014 use a calibrated regulator; do not estimate<\/li>\n<li><strong>System:<\/strong> Suction-feed only<\/li>\n<li><strong>Cycle duration:<\/strong> 1\u20132 minutes per cycle; maximum 3 cycles before rest and inspection<\/li>\n<li><strong>Standoff distance:<\/strong> 120\u2013160 mm (increased vs. standard to further reduce impact energy)<\/li>\n<li><strong>Angle:<\/strong> 45\u201360\u00b0 off-perpendicular to part surface, to reduce direct impact energy while maintaining coverage<\/li>\n<li><strong>Inspection:<\/strong> After every single cycle; deformation is the primary reject criterion<\/li>\n<\/ul>\n<\/div>\n<p>At Shore A 75\u201380 and below, there is a genuine question of whether ceramic bead blasting is the right depowdering method at all. For very fine geometry or very soft materials, manual compressed-air depowdering combined with vibration (ultrasonic or mechanical) may deliver better results with less deformation risk. Assess on a part-by-part basis.<\/p>\n\n<div class=\"dive\"><div class=\"dive-i\">&#128196;<\/div><div>\n<span class=\"dive-l\">Related Reference<\/span>\n<a href=\"https:\/\/hlh-js.com\/resource\/blog\/ceramic-beads-vs-plastic-media-for-sls-powder-removal-gentle-options-compared\/\" target=\"_blank\" rel=\"noopener noreferrer\">Ceramic Beads vs. Plastic Media for SLS Powder Removal: Gentle Options Compared<\/a>\n<p>Side-by-side comparison of ceramic bead and plastic media performance on flexible SLS materials \u2014 decision framework for Shore A below 82.<\/p>\n<\/div><\/div>\n\n<h2 id=\"c03-multicycle\">6. Multi-Cycle Approach and Mid-Cycle Inspection<\/h2>\n<p>The single most important operational rule for TPU SLS ceramic bead blasting is: <strong>never run a single extended cycle<\/strong>. Unlike PA12 where a single 8-minute cycle is the standard, TPU requires multiple short cycles with inspection between each one.<\/p>\n<p>The multi-cycle approach serves two purposes. First, it limits the cumulative impact energy in any single blast session, preventing localized over-blasting on exposed geometry. Second, it allows mid-cycle inspection to catch deformation early \u2014 before it becomes irreversible \u2014 and to redirect coverage to areas that still show residual powder.<\/p>\n<h4>Standard multi-cycle inspection protocol for TPU SLS<\/h4>\n<ol>\n<li>Run Cycle 1 (1.5\u20133 min at protocol pressure)<\/li>\n<li>Remove part from cabinet; blow clean with compressed air<\/li>\n<li>Inspect under bright directional light for: deformation of features; completeness of powder removal by area; surface texture uniformity across all faces<\/li>\n<li>If no deformation and powder remains: continue to Cycle 2<\/li>\n<li>If deformation observed: stop; document failure; adjust pressure down 4\u20136 PSI and re-qualify on next part<\/li>\n<li>If clean: proceed to downstream operations<\/li>\n<\/ol>\n<p>Rotate the part between cycles to distribute blast impact across all surfaces. A part that was blasted from the top in Cycle 1 should be blasted from the side in Cycle 2, and so on. This prevents any single face from receiving disproportionate cumulative impact.<\/p>\n\n<h2 id=\"c03-fixture\">7. Fixture and Support Design for Flexible SLS Blasting<\/h2>\n<p>Flexible SLS parts that are not fixtured during blasting will move, flex, and rotate under the blast plume, producing uneven coverage and potentially deforming unsupported sections. Effective fixture design for TPU SLS blasting follows different principles than for rigid PA12:<\/p>\n<ul>\n<li><strong>Distribute support across the widest possible base area<\/strong> \u2014 a single-point support concentrates reaction force; a distributed cradle spreads it across the part&#8217;s natural contact surface<\/li>\n<li><strong>Do not over-constrain flexible features<\/strong> \u2014 clamping a flexible joint rigidly during blasting prevents it from absorbing impact through its natural compliance; leave intentionally flexible sections free within their design range while supporting the rigid body<\/li>\n<li><strong>Use soft fixture material<\/strong> \u2014 aluminium or steel fixtures with hard edges can deform soft TPU parts at the fixture contact points under blast pressure; use rubber-lined fixtures or soft PA12 SLS cradles for flexible SLS parts<\/li>\n<li><strong>Design for multi-position access<\/strong> \u2014 a single fixture position rarely exposes all surfaces; design fixtures that allow the part to be repositioned between cycles with minimal handling<\/li>\n<\/ul>\n\n<h2 id=\"c03-ra\">8. Surface Finish Outcomes on TPU SLS After Blasting<\/h2>\n<p>Surface finish Ra on TPU SLS parts after ceramic bead blasting is higher and more variable than on rigid nylon, due to the surface compliance effect under bead impact. The Ra values below reflect outcomes on Shore A 85\u201395 TPU at recommended protocol parameters:<\/p>\n<div class=\"tw\"><table><thead><tr><th>Surface Orientation<\/th><th>As-Built Ra<\/th><th>After ZS 0.10\u20130.15 mm \/ 38\u201342 PSI<\/th><\/tr><\/thead>\n<tbody>\n<tr><td>Horizontal (top face)<\/td><td>14\u201320 \u00b5m<\/td><td>9\u201315 \u00b5m<\/td><\/tr>\n<tr><td>Side \/ angled<\/td><td>20\u201328 \u00b5m<\/td><td>12\u201320 \u00b5m<\/td><\/tr>\n<tr><td>Downward-facing<\/td><td>16\u201322 \u00b5m<\/td><td>10\u201317 \u00b5m<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>Post-blast Ra on TPU is 3\u20135 \u00b5m higher than on equivalent rigid PA12 at the same bead size and pressure range. This is inherent to the material&#8217;s compliance and cannot be eliminated within the safe-pressure window. For TPU SLS parts, the primary quality outcome of blasting is <em>completeness of powder removal<\/em> \u305d\u3057\u3066 <em>surface uniformity<\/em>, not absolute Ra minimization \u2014 Ra values in the 9\u201320 \u00b5m range are normal and acceptable for most flexible SLS applications.<\/p>\n\n<div class=\"dive\"><div class=\"dive-i\">&#128196;<\/div><div>\n<span class=\"dive-l\">Related Reference<\/span>\n<a href=\"https:\/\/hlh-js.com\/resource\/blog\/surface-finish-and-ra-values-after-ceramic-bead-blasting-sls-3d-printed-parts\/\" target=\"_blank\" rel=\"noopener noreferrer\">Surface Finish and Ra Values After Ceramic Bead Blasting SLS 3D Printed Parts<\/a>\n<p>Comprehensive Ra and Rz dataset across all SLS materials and bead grades, with measurement protocol templates.<\/p>\n<\/div><\/div>\n\n<h2 id=\"c03-vs-plastic\">9. Ceramic Beads vs. Plastic Media for Flexible SLS<\/h2>\n<p>The question of whether to use ceramic beads or plastic media (acrylic, melamine) for flexible SLS depowdering comes down to a specific trade-off: impact gentleness vs. cleaning effectiveness.<\/p>\n<p>Plastic media (density ~1.2\u20131.6 g\/cm\u00b3) delivers less kinetic energy per particle than ceramic ZS (3.8\u20134.0 g\/cm\u00b3) at the same blast velocity. For very soft TPU (Shore A 75\u201380), this lower impact energy is the safety margin that prevents deformation \u2014 and plastic media is the better choice.<\/p>\n<p>But for Shore A 82\u201395 TPU, ceramic beads at properly reduced pressure (33\u201345 PSI) still deliver more cleaning effectiveness than plastic media at equivalent pressure. This is because ceramic&#8217;s higher density converts velocity to impact energy more efficiently: at 38 PSI, a ZS bead arrives at the semi-sintered skin with 2.5\u00d7 the kinetic energy of an acrylic bead at the same velocity. That energy differential is the difference between effective skin removal and a surface that looks clean under casual inspection but still carries adherent powder contamination.<\/p>\n<p>Recommendation: use ceramic ZS beads for Shore A 82\u201395 TPU at reduced pressure. Switch to plastic media only for Shore A 75\u201380 or softer, or for extremely delicate geometry where even the lowest ceramic bead protocol causes measurable deformation.<\/p>\n\n<h2 id=\"c03-faq\">\u3088\u304f\u3042\u308b\u8cea\u554f<\/h2>\n<div>\n<div class=\"fi\"><button class=\"fq\" aria-expanded=\"false\">What blast pressure is safe for Shore A 85\u201395 TPU SLS parts? <span class=\"fi-icon\">+<\/span><\/button>\n<div class=\"fa\"><p>For Shore A 85\u201395 TPU with wall thicknesses above 2 mm, a blast pressure of 35\u201345 PSI in a suction-feed cabinet is the recommended starting range. Run in cycles of 2\u20134 minutes and inspect between each for deformation of walls, collapse of lattice cells, or rounding of sharp features. If any deformation is observed, reduce pressure by 5 PSI and re-qualify on the next part. For walls below 2 mm or lattice struts below 1.5 mm, start at 33\u201338 PSI with very fine beads (0.05\u20130.10 mm).<\/p><\/div><\/div>\n<div class=\"fi\"><button class=\"fq\" aria-expanded=\"false\">Can I use the same blast cabinet for both rigid PA12 and flexible TPU SLS parts? <span class=\"fi-icon\">+<\/span><\/button>\n<div class=\"fa\"><p>Yes \u2014 the same suction-feed blast cabinet handles both materials. No media change is needed if you are using ZS ceramic beads for both PA12 and Shore A 85\u201395 TPU. The key change is reducing inlet pressure from the PA12 range (55\u201375 PSI) to the TPU range (30\u201345 PSI) \u2014 a simple regulator adjustment. After processing TPU, blow the cabinet clear of any remaining TPU powder before returning to PA12 production, as TPU powder residue is heavier and stickier than PA12 powder and may affect surface finish on subsequent PA12 runs if left in the chamber.<\/p><\/div><\/div>\n<div class=\"fi\"><button class=\"fq\" aria-expanded=\"false\">How do I blast internal lattice structures in flexible SLS parts without deforming them? <span class=\"fi-icon\">+<\/span><\/button>\n<div class=\"fa\"><p>Blast lattice structures at the lowest pressure in your safe range (30\u201335 PSI for Shore A 85\u201395), using fine beads (0.05\u20130.10 mm) and very short cycles of 1.5\u20132.5 minutes. Rotate the part between cycles to distribute impact evenly across all lattice faces. Inspect lattice cell shape under magnification after each cycle \u2014 this is the primary deformation indicator. If lattice cells are compressing or deforming, reduce pressure and extend total cycle count rather than increasing pressure to speed up cleaning. For lattice interiors that cannot be reached by ceramic beads at any safe pressure, compressed-air blow-off after the external blast is the practical supplement.<\/p><\/div><\/div>\n<div class=\"fi\"><button class=\"fq\" aria-expanded=\"false\">What is the minimum wall thickness at which ceramic bead blasting is safe for TPU SLS? <span class=\"fi-icon\">+<\/span><\/button>\n<div class=\"fa\"><p>For Shore A 85\u201395 TPU at 30\u201338 PSI, ceramic bead blasting with ZS media at 0.05\u20130.10 mm is generally safe for wall thicknesses of 1.2 mm and above. For walls of 0.8\u20131.2 mm, reduce pressure to 28\u201332 PSI and limit cycles to 1\u20132 minutes each. For walls below 0.8 mm on flexible TPU, consider manual compressed-air depowdering as an alternative \u2014 the deformation risk from any practical ceramic bead protocol outweighs the cleaning benefit at this wall thickness.<\/p><\/div><\/div>\n<\/div>\n\n<h2>Related Articles in This Series<\/h2>\n<p>Part of the complete series on ceramic bead SLS depowdering. Return to the <a href=\"https:\/\/hlh-js.com\/resource\/blog\/ceramic-beads-sls-powder-removal-complete-guide\/\" target=\"_blank\" rel=\"noopener noreferrer\">Ceramic Beads for SLS Powder Removal \u2014 Complete Guide<\/a> for the full overview.<\/p>\n<div class=\"rel-g\">\n<div class=\"rel-c\"><a href=\"https:\/\/hlh-js.com\/resource\/blog\/ceramic-bead-blasting-pa12-nylon-sls-parts-depowdering-and-surface-prep\/\" target=\"_blank\" rel=\"noopener noreferrer\">Ceramic Bead Blasting for PA12 Nylon SLS Parts<\/a><p>Full protocol for the dominant rigid SLS material \u2014 bead selection, pressure, Ra data.<\/p><\/div>\n<div class=\"rel-c\"><a href=\"https:\/\/hlh-js.com\/resource\/blog\/ceramic-bead-depowdering-pa11-nylon-sls-parts-bio-based-material-processing\/\" target=\"_blank\" rel=\"noopener noreferrer\">Ceramic Bead Depowdering for PA11 Nylon SLS Parts<\/a><p>Bio-based PA11 protocol and fixture requirements for flexible PA11 assemblies.<\/p><\/div>\n<div class=\"rel-c\"><a href=\"https:\/\/hlh-js.com\/resource\/blog\/ceramic-beads-vs-plastic-media-for-sls-powder-removal-gentle-options-compared\/\" target=\"_blank\" rel=\"noopener noreferrer\">Ceramic Beads vs. Plastic Media for SLS Powder Removal<\/a><p>When plastic media outperforms ceramic for the softest flexible SLS materials.<\/p><\/div>\n<div class=\"rel-c\"><a href=\"https:\/\/hlh-js.com\/resource\/blog\/ceramic-bead-size-selection-for-sls-powder-removal-matching-mesh-to-part-geometry\/\" target=\"_blank\" rel=\"noopener noreferrer\">Ceramic Bead Size Selection Guide<\/a><p>Complete bead size reference \u2014 fine-bead selection for delicate TPU geometry.<\/p><\/div>\n<div class=\"rel-c\"><a href=\"https:\/\/hlh-js.com\/resource\/blog\/blast-pressure-and-cycle-time-for-ceramic-bead-sls-depowdering-optimization-guide\/\" target=\"_blank\" rel=\"noopener noreferrer\">Blast Pressure and Cycle Time Optimization<\/a><p>Process parameter guide across all SLS materials \u2014 qualification methodology.<\/p><\/div>\n<div class=\"rel-c\"><a href=\"https:\/\/hlh-js.com\/resource\/blog\/surface-finish-and-ra-values-after-ceramic-bead-blasting-sls-3d-printed-parts\/\" target=\"_blank\" rel=\"noopener noreferrer\">Surface Finish Ra Values After Ceramic Bead Blasting<\/a><p>Ra data across all SLS materials including flexible grades \u2014 measurement protocol.<\/p><\/div>\n<\/div>\n\n<div class=\"cta\"><h3>Get the Right Ceramic Beads for Flexible SLS Depowdering<\/h3>\n<p>Jiangsu Henglihong Technology Co., Ltd. supplies fine-grade zirconia-silicate and alumina-silicate ceramic blasting beads from 0.05 mm to 0.60 mm. Tell us your TPU Shore hardness, wall geometry, and geometry complexity \u2014 we will recommend the optimal grade and size for your application.<\/p>\n<a href=\"https:\/\/hlh-js.com\/contact\/\" target=\"_blank\" rel=\"noopener noreferrer\" class=\"btn\">Request Samples &amp; Technical Guidance<\/a><\/div>\n<\/article>\n\n<script>(function(){var b=document.querySelectorAll('.hlh-sls-c03 .fq');b.forEach(function(btn){btn.addEventListener('click',function(){var a=this.nextElementSibling,o=a.classList.contains('open');document.querySelectorAll('.hlh-sls-c03 .fa').forEach(function(x){x.classList.remove('open')});document.querySelectorAll('.hlh-sls-c03 .fq').forEach(function(x){x.classList.remove('open');x.setAttribute('aria-expanded','false')});if(!o){a.classList.add('open');btn.classList.add('open');btn.setAttribute('aria-expanded','true')}})})})();<\/script>","protected":false},"excerpt":{"rendered":"<p>&#8592; Part of: Ceramic Beads for SLS Powder Removal \u2014  [&#8230;]<\/p>","protected":false},"author":1,"featured_media":13850,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[62,175,138],"tags":[],"class_list":["post-13848","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","category-industry","category-resource"],"_links":{"self":[{"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/posts\/13848","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/comments?post=13848"}],"version-history":[{"count":2,"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/posts\/13848\/revisions"}],"predecessor-version":[{"id":13851,"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/posts\/13848\/revisions\/13851"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/media\/13850"}],"wp:attachment":[{"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/media?parent=13848"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/categories?post=13848"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/hlh-js.com\/ja\/wp-json\/wp\/v2\/tags?post=13848"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}